The most fun element of our daily routine is probably a refreshing morning shower. Understandably, you'd want to make this an enjoyable and relaxing experience. A slight bathroom improvement can have a significant effect, and installing new fixtures or replacing the old shower head is one of the simplest options.
Perhaps you'd want to switch to a new, water-conserving showerhead. In my opinion, an LED shower head would be a nice touch. Moreover, you may want to replace a shower head when it becomes an outdated shower head.
Our company, Queen Charlotte Plumbing, can solve all kinds of problems relating to shower heads with their fantastic services. So, you can call us at 704-707-3339 to get our outstanding services.
First, you need to prepare the workspace before replacing a showerhead. For this, you have to perform some tasks. Here are the points:
An adjustable wrench, two slip joint pliers, a new showerhead, and a cloth are necessary to replace a showerhead successfully. So, collect all these types of equipment. A Teflon tape might be advantageous as well. These types of equipment are available at a house development stock.
Correctly switched- off the shower knobs & tighten them safely. Changing a shower head will keep any water leaking out as you labor. Don't try to turn off the water flow to save on water bills; it would be a waste of time.
To protect the shower floor surface or tub from falling materials or tools, place a cloth in the tub or on the shower floor. If you are more eager, tape the drain so that nothing can slip around the material or blanket that ends up in the gutter.
Wind up a towel in the region of the foundation of the shower arm. To tighten the shower arm securely when you unscrew the shower head, open channel locks and clamp them onto the towel and shower arm. After that, wrap a cloth around the shower head and tighten it down on the base with an adjustable wrench.
To remove the shower head from the shower arm altogether, turn the head in the opposite clockwise direction. Few shower heads are loosely attached and can be removed by rotating them converse clockwise by hand tightening. You can easily loosen the shower head by hand first. But if that doesn't work, you can try using the tools and clothes to transfer it.
Wipe the shower arm's screw threads clean with a clean towel. Using an old toothbrush, you may also mop any garbage accumulation or rust within the pipe. Never keep an old Teflon tape within the threads of the shower arm.
Wrap around 2-3 wraps of Teflon tape around the shower arm's threads following a clockwise direction. Don't forget to ensure the tape has an excellent connection to the lines. Conceal the tape clockwise to prevent the stamping Teflon tape from ruining when linking it to the new shower head. Make sure to pressure the tapes into the threads' canals.
To secure the new shower head, rope it clockwise by hand tighten. After the shower head is in place, tighten it with towels, pliers, and an adjustable wrench. Fold a cloth around the shower heads and shower arm's bases.
To secure the shower arm to the correct position, grab the clothes with the pliers. Allow the showerhead to go clockwise as far as possible with the adjustable wrench screwed to the cloth. You can follow the same way to install any new shower head, including a fixed embed and an extension arm shower head.
The main variety is to attach a conductor within the real shower head & an extension arm-held shower head. When buying an arm-held shower head, you will most likely get additional installation instructions.
To check the new shower head, turn on the water flow, and check the water pressure. Make sure there is an adequate amount of water pressure into your shower heads. Moreover, it would be best to inspect the shower head for any leaks.
Switch off the water, replace the Teflon tape, and tighten it more if you detect any leaks. Never pull the shower head too much, and you should be careful about it. Ensure that the pipe connecting the shower arm to the piping method does not disrupt the sealant. It will result in a water leak, damaging the home and accelerating mold growth.
We face many questions that people ask on our website about replacing a shower head. You will get a very friendly reply regarding replacing shower heads or installing a new shower from us. Here we are ready to answer some of the most asked questions on the internet.
Installing the cost of a new head may vary depending on the types of jobs. The average cost to install a shower head is between $75-$150, including the labor cost & the shower head's price. If you want to install an expensive one, you may need more than $1500.
Not at all; it needs only a few minutes to learn to change a shower head. A new shower head helps to reduce water usage, thus saving money on water bills.
Usually, shower heads last for a long time, but their performance may get hampered due to using overtime. Then it's the perfect time to remove the old shower. Here are some causes below-
It's better to replace your shower head when you find it difficult to clean. It will be more challenging to clean if there is hard water in your pipe. In this case, you should replace a shower head for at least after six to eight months. Unfortunately, many of us are not careful about it.
Using Teflon tape is necessary to install a shower head, and we provide it with every shower head without taking any extra charge. Never buy an old Teflon tape from an unprofessional plumbing company that may cause waste of your wealth. Our tape is probably the most high-quality product in the shop that performs great.
Suppose you fail to change a shower head by yourself, no worries. Call QUEEN CHARLOTTE PLUMBING, 8424 Old Statesville Rd Charlotte, NC 28269, to get plumbing services with all styles. Our company has long-term experience in this sector, and we will send an expert to your location as early as possible.
So, hurry up to call us at 704-707-3339.
